One tachometer, multiple measurements: c
- Easy one-hand operation
- Measurement of rpm, speeds and lengths
- Storage of mean, max. and min. values as well as the last measurement value
- Battery check "Low Batt"
- Robust design thanks to SoftCase (protective case)
- Measurement distance up to 600 mm (optical measurement)
Multiple functions in one tachometer
In the case of optical rpm measurement, you can use the testo 470 tachometer to record how fast a rotating object rotates. Thus, for example, you can check whether motors, shafts and fans are functioning correctly in order to spot any impending defects due to overload at an early stage.
For rpm measurement, simply stick a reflective marker on the measurement object and aim the visible red beam at the reflective marker. The measurement can then start (at a distance of up to 600 mm between tachometer and measurement object). The tachometer is easy to operate using one hand.
However, the testo 470 tachometer not only provides the functions of an optical tachometer, it also functions as a mechanical tachometer: Attach the adapter for the probe tip and measure the rpm mechanically. Attach the wheel to also measure speeds and lengths of rotors/conveyor belts.
You get the testo 470 tachometer in a transport case with practical accessories (reflective markers, softcase, etc.).Whats Included: testo 470 tachometer | Soft case | Reflective markers | Adapter | Set of Wheels 0.1 m & 6 | Batteries | Calibration protocol.
|Storage Temperature||0 to + 50°C|
|Operating temperature||-20 to +70 °C|
|Battery type||2 AA Alkaline Batteries|
|Battery life||40 h|
|Dimensions||175 x 60 x 28 mm|
|Optically with mod. light beam|
|Measuring range||+ 1 to + 99999 rpm|
|Accuracy||±0.02 of mv|
|Resolution|| 0.01 rpm (+1 to +99.99 rpm)
0.1 rpm (+100 to +999.9 rpm)
1 rpm (+1000 to +99999 rpm)
|±1 % of mv (+100 to +250 °C)|
|Resolution||0.1 °C / °F / °R|
|Measuring Range||+0.1 to +19999 rpm|
|Accuracy||±0.02 of mv|
|Use of Mechanical Wheel||0.1 m||6“||12“|
|Units rpm, m/min, ft/min, in/min, m, ft, in|
|The mechanical tolerance for measurements with a wheel is 0.2 %,
the measurement accuracy is dependent on handling, e.g application
pressure, angle etc.
Be The First To Review This Product!
Help other Testo Australia Pty Ltd. users shop smarter by writing reviews for products you have purchased.